Your position: Home / Auto Remote Key & Key Shell / For Toyota

Price:

Quantity:

Shipping Cost:

Description
Reviews

Aftermarket remote board and shell, no logo or no part numbers on it.

This is a complete remote with internal circuit board and chip

(Open your original key and confirm this number on the circuit board.)
271451-0310 for Japan Import 312MHz

FCC ID: PAGE1 D4
P/N: 89904-60E30
89904-60180

271451-0310 Board
(match with original board. If Not "271451-0310" on the board then this key will not work)
Compatible with the following:

for Toyota Land Cruiser 2008 2009 Japanese Markets

Important: When you are ready to program this key please hold the key right next to the Push to Start button for at least 30 seconds.

Follow the steps How to Unlock this Key:
First press and hold the 1, 2, and 3 buttons at the same time (according to the order shown in the following figure), after the indicator is on, release the 3rd button.
Keep pressing the 1st and 2nd buttons. After the light is off, press the 3rd button again. Then the light is on and release the 3rd button.
Repeat the second step 10 times or more until the indicator light flashes continuously, then you can release 3 buttons.
After the indicator light stops, the smart card is unlocked and can be used as a new card.
You need to have this aftermarket key cut and programmed by a local locksmith. DO NOT go to the DEALER they will charge you for ONE HOUR of labor and they tend to want to sell you one of their remotes and often will not program the remote for you or they may charge you and then claim it does not work. A locksmith is fast and inexpensive compared to a dealer.