Upgraded Red Flip Remote Key 315MHz 4D63 80 BIT Chip for Ford FCC: CWTWB1U331

Replacement Upgraded Flip Folding keyless entry remote key with battery and electronics installed.
 
Note:Aftermarket remote key ,no label on the back.the same function as the genuine.
 
Make sure your original remote and key are the same as in the top right corner of our picture. 
 
FCC ID : CWTWB1U331
CHIP ID : 4D63 80 BIT
BATTERY : CR2032
FREQUENCY : 315 MHZ
SERVICE KEY : H75
Please be sure to match this key to your current blade style. Cut keys are non-refundable.
 
Suitable for the following vehicles:
 
Ford    Crown Victoria    2004 - 2011
Ford    Econoline    2004 - 2013
Ford    Edge    2007 - 2015
Ford    Escape    2005 - 2012
Ford    Expedition    2003 - 2016
Ford    Explorer    2001 - 2015
Ford    Explorer Sport Trac    2001 - 2010
Ford    F-150    2004 - 2014
Ford    F-250    2004 - 2016
Ford    F-350    2004 - 2016
Ford    F-450    2012 - 2016
Ford    F-550    2012 - 2016
Ford    F-650    2012 - 2017
Ford    F-750    2012 - 2017
Ford    Five Hundred    2005 - 2007
Ford    Flex    2009 - 2017
Ford    Focus    2005 - 2011
Ford    Freestar    2005 - 2007
Ford    Freestyle    2005 - 2007
Ford    Fusion    2006 - 2012
Ford    Mustang    2005 - 2013
Ford    Mustang    2005 - 2015
Ford    Ranger    2001 - 2011
Ford    Taurus    2000 - 2012
Ford    Taurus X    2008 - 2009
Ford    Thunderbird    2004 - 2005
Ford    Windstar    2001 - 2003
Lincoln    Aviator    2004 - 2005
Lincoln    LS    2004 - 2006
Lincoln    Mark LT    2006 - 2008
Lincoln    Navigator    2004 - 2012
Lincoln    Town Car    2004 - 2011
Mercury    Grand Marquis    2005 - 2011
Mercury    Mariner    2005 - 2011
Mercury    Milan    2006 - 2011
Mercury    Montego    2005 - 2007
Mercury    Monteray    2005 - 2007
Mercury    Sable    2000 - 2009
 
You will need to have this key cut and programmed by a competent local automotive locksmith.
Main dealers will not programme aftermarket keys as they are only able to programme genuine keys due to having limited software capabilities.

Step by Step How to Program Instructions:
 
Note: It is necessary to have all of your keyless remotes available prior to beginning this procedure. All keyless remotes not present during the programming procedure will not work when the programming procedure has been competed.
 
1. DO NOT depress brake pedal during this programming procedure.
 
2. Unlock all doors using the power door lock switch on door panel.  
 
3. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode.
 
4. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.
 
5. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.
 
6. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.